GP-EDGE setting for windows

March 28, 2006

You will get most the data from GP home page. But there should be one correction. You have to use the init strig as ” AT+CGDCONT = 1,”IP”,”gpinternet” ”
Now it will work without any problem.

Advertisements

EDGE/GPRS in Linux

March 26, 2006

Today me(lavluda) && salahuddin66 successfully configured GPRS/EDGE of Grameen Phone and Aktel in Linux.

to check your mobile as a modem
——————————-
#wvdialconf

Grameen Phone

here is a sample of my wvdial.conf (Grameen Phone EDGE/GPRS)
————————————————————
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,”IP”,”gpinternet”
Modem Type = Analog Modem
ISDN = 0
Phone = *99***1#
Modem = /dev/ttyUSB0
Username = xyz
Password = xyz
Baud = 115200
———————————————————–
change the modem speed/Baud and /dev/ttyUSB0 according to your mobile phone

Aktel

here is a sample of my wvdial.conf (Aktel GPRS)
————————————————————
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
Phone = *99***1#
Modem = /dev/ttyUSB0
Username = xyz
Password = xyz
Baud = 115200
———————————————————–
change the modem speed/Baud and /dev/ttyUSB0 according to your mobile phone

Start
To start type wvdial in shell